The spring torsion testing equipment is a specialized testing instrument used to measure the torsion (or torque) generated by a spring during torsion. It is widely used to verify the strength, lifespan, and performance of springs.

Spring Torsion Tester Troubleshooting and Repair Methods

Trouble 1: If there is no display after pressing the "Power On" button, the battery is dead. Recharge it.

Trouble 2: If the tester automatically shuts off after powering on, shuts off during use, or cannot be charged, replace the charger.

Trouble 3: If the tester beeps upon power-on or displays a large value, ensure there is no external force applied. Press and hold the "Set" button for more than 4 seconds to restore factory settings. If this does not restore normal operation, return it to the manufacturer for repair.

Trouble 4: If the spring torsion tester's parameters are incorrectly set, press and hold the "Set" button for more than 4 seconds. After hearing a "beep," the tester will automatically shut down. Power it on again.

Trouble 5: If the test values are inaccurate or the error is too large, the tester should be sent to a metrology department for calibration or returned to the factory for calibration.

Proper maintenance not only extends the lifespan of digital spring torsion tester but also ensures the accuracy of test results. Selecting a spring torsion tester requires comprehensive consideration of factors such as testing needs, performance parameters, functional characteristics, quality, and reliability.